How to fix a Makita Cutter when the cutting disc does not rotate?
If the cutting disc of your Makita Cutter does not rotate, ensure the cutting disc-tightening bolt is securely tightened. If the issue persists, the drive system might be abnormal, requiring professional inspection and maintenance.
Why cutting disc does not stop immediately on my Makita Saw?
If the cutting disc on your Makita Saw doesn't stop immediately, stop the engine immediately. This may be due to high idling rotation, which requires adjustment. If that's not the case, it could be due to a detached throttle linkage or an abnormal drive system, both of which require professional inspection and maintenance.
What to do if the cutting disc does not rotate on my Makita Saw?
If the cutting disc on your Makita Saw isn't rotating, stop the engine immediately. This could be due to a loosened cutting disc-tightening bolt; ensure it is tightened securely. If the bolt is secure and the disc still doesn't rotate, the drive system may be abnormal, requiring professional inspection and maintenance.
What to do if the cutting disc of my Makita Cutter does not rotate?
If the cutting disc of your Makita Cutter does not rotate, check if the cutting disc-tightening bolt is loosened and tighten it securely.
What to do if Makita Saw engine stops soon after starting?
If your Makita Saw engine stops soon after starting, or the engine speed doesn't increase, it might be due to insufficient warm-up; perform a warm-up operation. Also, ensure the choke lever is set to “ON” once the engine is warmed up. A clogged fuel filter or a contaminated air cleaner can also cause these issues; clean them. For abnormal carburetor or drive system make request for inspection and maintenance.
Why is the cutting disc on my Makita Saw not rotating?
If the cutting disc on your Makita Saw isn't rotating, it could be due to a loosened cutting disc-tightening bolt (tighten securely). For abnormal drive system it is recommended to make request for inspection and maintenance.
General| Depth | 780 mm |
|---|---|
| Width | 310 mm |
| Height | 455 mm |
| Weight | 12900 g |
| Product type | Petrol abrasive saw |
| Product color | Black, Blue |
| Sound power level | 104.6 dB |
| Cutting speed | 80 m/s |
| Blade diameter | 350 mm |
| Idle speed (max) | 4300 RPM |
| Cutting depth (90º) | 122 mm |
| Sound pressure level | 92.7 dB |
| Sound level uncertainty | 2.5 dB |
| Engine type | 4-stroke engine |
| Engine power | 4.1 hp |
| Uncertainty K | 2 m/s² |
| Fuel tank capacity | 1.1 L |
| Vibration emission | 2.7 m/s² |
| Engine displacement | 75.6 cm³ |
| Arbor diameter | 20 mm |
| Idle speed (min) | 9100 RPM |
| Anti-vibration system | Yes |
| Engine number of strokes | 4 |
| Air filtration stages quantity | 5 |
| Motor power | 4.5 hp |
| Power source | Gasoline |
| Motor rated power | 3.3 kW |
To Next Page
