To Next PageTo Next PageWhat to do if the cutter blade does not stop immediately on my Makita Lawn and Garden Equipment?
If the cutter blade on your Makita Lawn and Garden Equipment does not stop immediately, stop the engine immediately. This could be due to high idling rotation, which needs adjustment. Also, check if the throttle wire is detached and attach it securely.
Why does my Makita EM2650LH engine stop soon or not increase speed?
If the engine of your Makita Lawn and Garden Equipment stops soon after starting, or if the engine speed does not increase, several factors could be the cause. Make sure that you perform a sufficient warm-up operation. Check that the choke lever is set to “OPEN” if the engine is warmed up. A clogged fuel filter or a contaminated air cleaner can also cause these issues, so clean them.
What to do if my Makita Lawn and Garden Equipment vibrates abnormally?
If the main unit of your Makita Lawn and Garden Equipment vibrates abnormally, stop the engine immediately. This could be due to a broken, bent, or worn cutter blade, which should be replaced. Check if the cutter blade-tightening nut is loosened and tighten it securely. Also, make sure the convex part of the cutter blade and cutter blade support fitting are securely attached.
What to do if the cutter blade does not rotate on my Makita Lawn and Garden Equipment?
General| Brand | Makita |
|---|---|
| Model | EM2650LH |
| Category | Lawn and Garden Equipment |
| Language | English |
