What to do if the nylon cutting cord does not feed on my Makita Trimmer?
If the nylon cutting cord on your Makita Trimmer isn't feeding, the cord may be used up or tangled in the spool. Rewind the cord to resolve this.
What to do if the nylon cutting cord is not cut off at the correct length on my Makita Trimmer?
If the nylon cutting cord isn't being cut to the correct length on your Makita Trimmer, one potential reason is that the cord extends past the protector, in such case rewind the cord. Another potential reason is that the cord cutter on the protector is damaged or missing, and in this case you should contact an authorized service center for repairs.
Why does my Makita Trimmer vibrate abnormally?
Abnormal vibration in your Makita Trimmer can stem from several issues. Check for these potential causes: * A broken, bent, or worn cutting tool. If so, replace it. * A loose cutting tool, which you should tighten securely. * An unbalanced nylon cutting head due to a broken nylon cutting cord. Try feeding the cord by tapping the cutting head on the ground. * An irregular attachment of the cutting tool. Ensure it's properly attached. * An abnormal drive system. In this case, it's best to contact an authorized service center for repairs.
What to do if the cutting tool does not rotate on my Makita Trimmer?
If the cutting tool on your Makita Trimmer isn't rotating, here's what you should check: * Ensure the cutting tool is securely tightened. * Inspect for any twigs or foreign matter caught in the cutting tool and remove them. * If the issue persists, it could be an abnormal drive system, and you should contact an authorized service center for repairs.
Why is my Makita Lawn and Garden Equipment vibrating abnormally?
If your Makita Lawn and Garden Equipment vibrates abnormally, several issues could be the cause. The cutting tool might be broken, bent, or worn, requiring a replacement. Alternatively, the cutting tool may be loosely attached and need tightening. If you're using a nylon cutting cord, one end may have broken, unbalancing the cutting head; try feeding the cord by tapping the head on the ground. Also, check for irregular attachment of the cutting tool and ensure it's properly attached. If none of these resolves the vibration, there may be an abnormal drive system, in which case contact an authorized service center for repairs.
How to fix a Makita Lawn and Garden Equipment cutting tool that does not rotate?
If the cutting tool on your Makita Lawn and Garden Equipment isn't rotating, it could be due to a few reasons. First, check if the cutting tool is loosely attached and tighten it securely. It's also possible that the cutting tool has caught a twig or other foreign matter, so remove any obstructions. If neither of these solutions works, the drive system may be abnormal, and you should contact an authorized service center for repairs.
What to do if the nylon cutting cord is not cut off at the correct length on my Makita Lawn and Garden Equipment?
If the nylon cutting cord on your Makita Lawn and Garden Equipment isn't being cut to the correct length, it could be because the cord cutter on the protector is damaged or missing, in which case you should contact an authorized service center for repairs. Another possibility is that the cord extends past the protector, and you should rewind the cord.
Why is the nylon cutting cord not feeding on my Makita Lawn and Garden Equipment?
If the nylon cutting cord on your Makita Lawn and Garden Equipment isn't feeding, it's possible that the cord is either used up or tangled in the spool. Try rewinding the cord to resolve this issue.
What to do if my Makita EM409MP Garden Machinery Accessories vibrates abnormally?
If the main unit of your Makita Garden Machinery Accessories vibrates abnormally, immediately stop the motor. This could be due to several reasons: * A broken, bent, or worn cutting tool - replace it. * A loose attachment of the cutting tool - tighten it securely. * One end of the nylon cutting cord has been broken and the nylon cutting head got unbalanced - feed the nylon cutting cord by tapping the nylon cutting head on the ground. * Irregular attachment of the cutting tool - attach it properly. * Abnormal drive system - contact an authorized service center for repairs.
What to do if the cutting tool does not rotate on my Makita Garden Machinery Accessories?
If the cutting tool on your Makita Garden Machinery Accessories does not rotate, stop the motor immediately. This issue may arise due to: * Loose attachment of the cutting tool - tighten it securely. * The cutting tool has caught a twig - remove any foreign matter. * Abnormal drive system - contact an authorized service center for repairs.
Lists power units approved for use with the attachment.
Explains symbols used in the manual and on the attachment for clarity.
Provides critical precautions for reducing risk of fire, electric shock, and personal injury.
Offers advice for operators, emphasizing alertness, common sense, and avoiding fatigue or impairment.
Specifies the machine's purpose for cutting grass, weeds, bushes, and undergrowth only.
Details essential protective gear like gloves, boots, goggles, ear protection, and dust masks.
Outlines checks for safety, fuel leaks, fasteners, parts, and tool installation before operation.
Warns against exposing the machine to rain or wet conditions to prevent electric shock.
Provides guidelines for safe refueling, emphasizing stopping the motor, avoiding flames, and proper ventilation.
Instructions for adjusting hanger and harness for proper balance and safe operation.
Guidelines for servicing the machine, using genuine parts, and checking components for wear or damage.
Recommendations for cleaning, drying, and storing the machine in a safe, dry location away from children.
Covers environmental awareness, throttle control, exhaust muffler, and accident response procedures.
Further safety advice including operator distance, tool speed, and dust precautions.
Details the proper matching of cutting tools with their respective protectors for safe operation.
Specific steps for installing the universal type protector, including the extension.
Specific steps for installing the narrow type protector.
Detailed steps for fitting metal blades, including safety warnings and applicability for EM408MP.
Specific instructions for EX2650LH power unit to set hanger and harness length.
Specific instructions for DUX18/XUX02 power units to adjust shoulder harness length.
Instructions for applying grease to the gear case, noting caution for hot surfaces.
Instructions for applying grease to the drive axle at specified working hours.
General| Brand | Makita |
|---|---|
| Model | EM409MP |
| Category | Garden Machinery Accessories |
| Language | English |
To Next Page
