To Next PageTo Next PageWhat to do if the blades do not move on my Makita EN410MP?
If the blades of your Makita Garden Machinery Accessories do not move, immediately stop the motor. This could be due to several reasons: * **Inappropriate angle of cutter unit:** Ensure the angle lock engages properly. * **A twig caught by the blades:** Remove any foreign matter. * **Drive system malfunction:** Have an authorized service center inspect and repair it.
What to do if blades do not stop on Makita EN410MP?
If the blades of your Makita Garden Machinery Accessories do not stop, stop the motor immediately. This issue arises when the power unit isn't functioning as it should. Refer to the power unit's instruction manual for guidance.
What to do if the blades do not move on my Makita Lawn and Garden Equipment?
If the blades of your Makita Lawn and Garden Equipment do not move, it could be due to several reasons. First, ensure that the angle lock engages properly, as an inappropriate angle of the cutter unit can cause this issue. Second, check for any obstructions, such as a twig, caught by the blades and remove any foreign matter. Finally, if the drive system isn't functioning correctly, it's best to have an authorized service center inspect and repair it.
General| Brand | Makita |
|---|---|
| Model | EN410MP |
| Category | Garden Machinery Accessories |
| Language | English |
Essential safety precautions for operating the hedge trimmer, including blade safety and handling.
Specific safety advice for extended-reach models, focusing on electrical hazards and control.
General instructions to read all warnings and save them for future reference.
Guidelines for safe handling, storage, and general use of the hedge trimmer.
Recommended safety gear including helmet, goggles, gloves, and ear protection.
Ensuring a safe operating environment, avoiding electrical lines and hazards.
Steps and precautions before starting assembly or adjustment of the equipment.
Safe practices during hedge trimmer operation, including emergency stops and handling.
Step-by-step instructions for attaching the hedge trimmer to a compatible power unit.
Technique for trimming hedges horizontally using the hedge trimmer.
Technique for trimming hedges vertically using the hedge trimmer.
Procedure for checking hedge trimmer blades for damage, cracks, or dullness.
Instructions on how to adjust the clearance between the upper and lower blades.
Guidance on lubricating moving parts, including gear case and drive axle.
Checking for loose bolts, nuts, screws, and damaged parts.
