How to fix no oil on chain for Makita Pole Saw?
If there's no oil on the chain of your Makita Pole Saw, it could be due to two main reasons. Check if the oil tank is empty and, if so, fill it. Also, the oil guide groove might be dirty, so try cleaning it.
What to do if Makita EY402MP motor stops quickly?
If the motor of your Makita Pole Saw stops running after only a short time, the battery's charge level is likely low. Recharge the battery. If recharging isn't effective, consider replacing the battery.
Why Makita EY402MP does not reach maximum RPM?
If your Makita Pole Saw isn't reaching its maximum RPM, there are a few potential causes. First, make sure the battery cartridge is properly installed as described in the manual. Another reason could be dropping battery power, so try recharging or replacing the battery cartridge. Also, the drive system may not be working correctly.
What causes abnormal vibration in Makita Pole Saw?
Abnormal vibration in your Makita Pole Saw can be caused by a loose guide bar or saw chain. In this case, adjust the guide bar and saw chain tension.
Why won't my Makita Pole Saw start?
Your Makita Pole Saw might not start due to several reasons. First, ensure a charged battery cartridge is correctly installed. Another possibility is a low battery voltage, so try recharging the battery. If that doesn't work, replace the battery. Also, the main power switch may be off. Turn the main power switch on again.
Why the saw chain cannot be installed on Makita EY402MP?
The saw chain might not install on your Makita Pole Saw if the combination of saw chain and sprocket isn't correct. Use the correct combination of saw chain and sprocket by referring to the section for specifications.
Details the model name, overall length, weight, and guide bar dimensions.
Specifies compatible saw chain types, guide bar, and sprocket combinations.
Lists compatible power units and explains safety symbols used in the manual.
Crucial safety precautions for operating the tool, covering environment and personal safety.
Instructions on checking for damaged parts and avoiding electrical hazards.
Guidelines for safe operation, including grip, head protection, and battery precautions.
Essential general safety advice for using the tool, including weather and fatigue.
Specifies required safety gear like helmet, goggles, gloves, and protective clothing.
Covers tool inspection, chain adjustment, safe refueling, and starting procedures.
Basic rules for operating the tool safely and effectively.
Detailed guidance on handling, cutting, and avoiding kickback.
Procedures for safely transporting the tool, including covering the chain.
Overview of necessary maintenance tasks to ensure tool longevity and safety.
Rules for safe handling, charging, and disposal of batteries.
Instructions on proper storage and essential first aid measures.
Identifies all components of the pole saw attachment with a diagram.
Step-by-step guide for removing and installing the saw chain and guide bar.
Detailed instructions on how to properly adjust the saw chain tension.
Steps for securely attaching the pole saw attachment to the power unit.
Guidance on filling and ensuring proper lubrication of the saw chain.
Key safety cautions to observe while actively using the tool.
Advice on safe and effective cutting practices, including avoiding kickback.
Instructions for securely carrying the pole saw attachment.
Overview of maintenance tasks to keep the tool in good condition.
Detailed guide on how to sharpen the saw chain for optimal performance.
Information on when to sharpen and the correct angles and tools to use.
Steps for cleaning the oil system and guide bar to ensure lubrication.
Procedures for cleaning the sprocket cover and when to replace the sprocket.
Guidelines for inspecting the entire tool and lubricating moving parts.
A table outlining required maintenance checks at different intervals.
Solutions for common malfunctions and problems encountered with the tool.
Information on recommended accessories for use with the tool.
To Next Page
General
