Need help?Do you have a question about the Makita FD01 and is the answer not in the manual?
Keep work area clean, well lit, and free from flammable atmospheres. Keep children and bystanders away.
Match power tool plugs to outlets, avoid earthed surfaces, and do not expose tools to rain or wet conditions.
Stay alert, use PPE, and prevent unintentional starting by ensuring the switch is off before connecting power.
Use auxiliary handles for better control and to prevent personal injury if the tool loses control.
Hold by insulated surfaces to avoid electric shock from hidden wiring contacting the tool or fastener.
Maintain firm footing and balance for better control, especially in unexpected situations.
Ensure no one is below when operating the tool in elevated positions to prevent injury.
Hold the tool firmly to maintain control during operation and prevent accidents.
Keep hands and clothing away from rotating parts to prevent entanglement and injury.
Do not leave the tool running unattended; operate it only when it is hand-held for safety.
Avoid touching hot drill bits or workpieces immediately after operation to prevent burns.
Exercise caution with materials containing toxic chemicals; prevent dust inhalation and skin contact.
Never disassemble the battery cartridge to prevent risks of injury or damage.
Stop operation if operating time is excessively shorter to avoid overheating or explosion risks.
Rinse eyes with water and seek medical attention immediately if battery electrolyte gets into them.
Avoid shorting battery terminals with conductive material to prevent burns, fire, or breakdown.
Instructions for safely installing and removing the battery cartridge, ensuring it locks in place.
The system automatically cuts off power to the motor to extend battery life when overloaded or low voltage.
How to start, stop, and control the tool's speed using the switch trigger.
Describes the electric brake function and when to seek service if it fails to stop the tool quickly.
How to activate the front lamp by pulling the switch trigger and its temporary illumination.
Instructions for inserting and removing bits securely using the sleeve mechanism.
Guidance on adjusting torque, applying pressure, and releasing the trigger when the clutch engages.
Steps for drilling in wood and metal, including using pilot holes, center-punch, and cutting lubricant.
Procedure for locking the switch for manual screwdriving, useful for checking screw tightness.
To Next Page
General
