Need help?Do you have a question about the Makita DHP453 and is the answer not in the manual?
General| Torque (max) | 42 N⋅m |
|---|---|
| Number of gears | 1 |
| Torque settings | 16 |
| Screw diameter (max) | 36 mm |
| Idle speed (1st gear) | 1300 RPM |
| Impact rate (low speed) | 6000 bpm |
| Impact rate (high speed) | 19500 bpm |
| Drilling diameter in concrete (max) | 13 mm |
| Reverse | Yes |
| Chuck type | Keyless |
| Product color | Black, Green |
| Power source | Battery |
| Battery voltage | 18 V |
| Battery included | No |
Weight and Dimensions| Weight | 1700 g |
|---|
Lists compatible battery cartridges and chargers for the models.
Explains symbols used on the equipment for user understanding.
Describes the primary functions and applications of the tool.
Provides noise level information (LPA, LWA) for the models.
Details vibration emission levels for different work modes.
Essential safety precautions for operating any power tool.
Guidelines for maintaining a safe working environment.
Crucial safety measures related to electrical hazards.
Advice for operator well-being and injury prevention.
Instructions for proper tool operation and maintenance.
Guidelines for safe and effective use of battery-powered tools.
General safety rules for using the hammer drill.
Specific precautions for using long drill bits.
Initial checks and warnings before battery usage.
Recommendations for optimizing battery longevity.
Steps for inserting and removing the battery pack.
How to check the battery charge level using indicator lamps.
Explains the tool's automatic shutdown features.
Describes how to operate the tool's trigger switch.
How to change the direction of tool rotation.
Instructions for selecting different speed settings.
Guide to choosing drilling, hammer drilling, or screwdriving modes.
Explains tool shutdown due to excessive current.
Explains tool shutdown due to low battery.
Explains how the LED lamp operates.
Steps to set the desired torque level for fastening.
Procedure for fitting and removing drill bits.
Instructions for attaching the tool hook accessory.
How to use the hanging hole for storage.
Detailed steps for performing hammer drilling.
Guidance on performing screwdriving tasks.
How to use the optional blow-out bulb accessory.
General instructions for drilling in wood and metal.
Chart showing torque vs time for standard bolts.
Chart showing torque vs time for high tensile bolts.
Safety tip when tool contacts wiring.
Recommended hearing protection.
Importance of using handles for control.
To Next Page
