Do you have a question about the Makita DHP453SFE and is the answer not in the manual?
Voltage | 18 V |
---|---|
Battery Type | Li-Ion |
Chuck Size | 13 mm |
Max Torque | 42 Nm |
Number of Gears | 2 |
Chuck Type | Keyless |
Max. Drilling Diameter in Steel | 13 mm |
Max. Drilling Diameter in Masonry | 13 mm |
Weight | 1.7 kg |
Impact Rate (Lo) | 6, 000 bpm |
No Load Speed | 0-400 / 0-1300 rpm |
Type | Cordless Hammer Drill |
Warns against complacency and stresses strict adherence to safety rules to avoid injury.
Details the automatic power cut-off feature for overload or low voltage to protect the battery.
Guide on choosing the correct operating mode (rotation, hammer drilling, clutch) using the mode changing ring.
Specific instructions and cautions for performing hammer drilling in concrete and stone.