To Next PageTo Next Page
Need help?Do you have a question about the Makita DHP458RTJ and is the answer not in the manual?
General| Type | Cordless Hammer Drill |
|---|---|
| Voltage | 18V |
| Battery Type | Li-ion |
| Max Torque | 65 Nm |
| Chuck Size | 13 mm |
| Weight | 1.7 kg (without battery) |
| Number of gears | 2 |
| Max. torque (soft) | 30 Nm |
| No load speed (low) | 0 - 400 rpm |
| No load speed (high) | 0-2000 rpm |
| Chuck type | Keyless |
| Max. drilling diameter in steel | 13 mm |
| Max. drilling diameter in masonry | 16 mm |
| Impacts per minute (low) | 0-6, 000 ipm |
| Impacts per minute (high) | 0-30000 bpm |
| No Load Speed | 0 - 2, 000 rpm |
| Blows Per Minute | 30, 000 ipm |
Details on tool capacities, speed, dimensions, weight, and rated voltage for different models.
The tool is intended for impact drilling in brick, concrete and stone.
Read all safety warnings and instructions before use to prevent injury.
Specific safety precautions for operating the cordless hammer driver drill.
Crucial safety instructions for handling, charging, and storing battery cartridges.
Instructions for safely installing and removing the battery cartridge from the tool.
Explanation of the tool's protection system for battery life extension.
Guidance for performing hammer drilling operations safely and effectively.
