Need help?Do you have a question about the Makita DHP456 and is the answer not in the manual?
General| Torque (max) | 50 N⋅m |
|---|---|
| Number of gears | 1 |
| Torque settings | 16 |
| Screw diameter (max) | 25 mm |
| Idle speed (1st gear) | 1500 RPM |
| Impact rate (low speed) | 6000 bpm |
| Impact rate (high speed) | 22500 bpm |
| Drilling diameter in concrete (max) | 13 mm |
| Soft grip | Yes |
| Chuck type | Keyless |
| Product design | Right-angle drill |
| Product color | Black, Blue |
| Power source | Battery |
| Battery voltage | 18 V |
| Battery included | No |
Weight and Dimensions| Weight | 1600 g |
|---|
Advises on keeping work area clean, avoiding explosive atmospheres, and keeping bystanders away.
Covers plug safety, body contact, rain/wet conditions, cord care, and outdoor use.
Emphasizes staying alert, using PPE, preventing unintentional starting, and proper handling.
Covers reading instructions, not disassembling, handling overheating, electrolyte, and shorting.
Details the procedure and cautions for hammer drilling.
Guides on screwdriving, drilling in wood/metal, and using blow-out bulb.
To Next Page
