To Next PageTo Next Page
Need help?Do you have a question about the Makita DHP458Z and is the answer not in the manual?
General| Number of gears | 2 |
|---|---|
| Torque settings | 21 |
| Idle speed (max) | 2000 RPM |
| Screw diameter (max) | 13 mm |
| Impact rate (low speed) | 6000 bpm |
| Impact rate (high speed) | 30000 bpm |
| Drilling diameter in wood (max) | 65 mm |
| Maximum torque (hard applications) | 91 N⋅m |
| Maximum torque (soft applications) | 58 N⋅m |
| Drilling diameter in concrete (max) | 16 mm |
| Soft grip | Yes |
| Chuck type | Keyless |
| Product design | Pistol grip drill |
| Vibration emission | 1.5 m/s² |
| Product color | Black, Blue |
| Power source | Battery |
| Charging time | 22 min |
| Battery voltage | 18 V |
Weight and Dimensions| Depth | 225 mm |
|---|---|
| Width | 79 mm |
| Height | 259 mm |
| Weight | 2300 g |
Ensures safe operation by maintaining a clean, well-lit workspace and keeping bystanders away.
Highlights risks of electric shock from wet conditions, damaged cords, and improper grounding.
Emphasizes staying alert, using common sense, and wearing appropriate protective equipment during operation.
Detailed steps for performing hammer drilling, emphasizing grip and handling during breakthrough.
Procedure for performing screwdriving tasks, including speed control and torque adjustment.
