Need help?Do you have a question about the Makita DHP483 and is the answer not in the manual?
General| Number of gears | 2 |
|---|---|
| Torque settings | 21 |
| Chuck capacity (min) | 1.5 mm |
| Sound pressure level | 83 dB |
| Idle speed (1st gear) | 500 RPM |
| Idle speed (2nd gear) | 1700 RPM |
| Impact rate (low speed) | 7500 bpm |
| Sound level uncertainty | 3 dB |
| Impact rate (high speed) | 25500 bpm |
| Drilling diameter in wood (max) | 36 mm |
| Vibration level (metal drilling) | 2.5 m/s² |
| Maximum torque (hard applications) | 40 N⋅m |
| Maximum torque (soft applications) | 23 N⋅m |
| Drilling diameter in concrete (max) | 13 mm |
| Vibration level (concrete drilling) | 10.5 m/s² |
| Soft grip | Yes |
| Product design | Pistol grip drill |
| Product color | Black, Blue |
| Uncertainty K | 1.5 m/s² |
| Number of batteries included | 2 pc(s) |
| Power source | Battery |
| Battery voltage | 18 V |
| Battery capacity | 5 Ah |
Weight and Dimensions| Depth | 176 mm |
|---|---|
| Width | 79 mm |
| Height | 247 mm |
| Weight | 1600 g |
Comprehensive safety guidelines for operating power tools, covering work area, electrical, and personal safety.
Details how the tool automatically stops to prevent damage from excessive current draw.
Describes the automatic shutdown mechanism when the tool or battery overheats.
Explains the system that stops operation when the battery capacity is too low.
Procedure for inserting and removing drill bits and driver bits from the chuck.
Step-by-step process for driving screws, including setting torque and clutch.
Detailed instructions for performing hammer drilling in masonry with safety precautions.
Specific techniques and tips for drilling holes accurately in wood.
Methods and advice for drilling holes in metal materials, including lubricant use.
Usage of the optional accessory to clean dust from drilled holes.
To Next Page
