To Next PageTo Next Page
Need help?Do you have a question about the Makita DHP481Z and is the answer not in the manual?
General| Number of gears | 2 |
|---|---|
| Torque settings | 21 |
| Chuck capacity (max) | 13 mm |
| Chuck capacity (min) | 1.5 mm |
| Idle speed (1st gear) | 550 RPM |
| Idle speed (2nd gear) | 2100 RPM |
| Drilling diameter in wood (max) | 76 mm |
| Maximum torque (hard applications) | 115 N⋅m |
| Maximum torque (soft applications) | 60 N⋅m |
| Drilling diameter in concrete (max) | 16 mm |
| Reverse | Yes |
| Product design | Pistol grip drill |
| Vibration emission | 1.5 m/s² |
| Product color | Black, Turquoise |
| Battery charger included | No |
| Power source | Battery |
| Battery voltage | 18 V |
Weight and Dimensions| Depth | 205 mm |
|---|---|
| Width | 79 mm |
| Height | 266 mm |
| Weight | 2700 g |
Key technical specifications for drilling and fastening.
Describes the tool's purpose and suitable applications.
Details the A-weighted noise levels according to EN60745.
Specifies vibration total values and emission levels.
Essential safety rules for all power tools.
Specific safety advice for this tool.
Instructions for installing, removing, and caring for the battery.
Explanation of the system that prevents overload and low voltage.
How to check the remaining battery charge.
Details on switch trigger, front lamp, and reversing switch.
Instructions on how to adjust the tool's speed settings.
How to choose between drilling, hammering, or clutch modes.
Setting the torque for screwdriving operations.
Instructions for attaching the side grip for stability.
How to insert drill bits and the bit holder.
Guidance on fitting the depth rod and hook.
How to perform hammer drilling safely and effectively.
Guidance on performing screwdriving tasks.
Instructions for drilling in wood and metal.
