Need help?Do you have a question about the Makita DHP481 and is the answer not in the manual?
General| Max Torque (Hard) | 115 Nm |
|---|---|
| Max Torque (Soft) | 60 Nm |
| Voltage | 18V |
| No Load Speed (High) | 0-2100 RPM |
| No Load Speed (Low) | 0-550 RPM |
| Chuck Capacity | 1.5 - 13 mm |
| Max. drilling diameter in masonry | 16 mm |
| Max. drilling diameter in steel | 13 mm |
| Max. drilling diameter in wood | 76 mm |
| Number of Gears | 2 |
| Battery Type | Li-ion |
| Blows per Minute (High) | 0 - 31500 ipm |
| Blows per Minute (Low) | 0-8, 250 BPM |
| Weight | 2.7 kg (with battery) |
Details drilling/fastening capacities, speed, blows, length, weight, and voltage.
Explains symbols, intended use, and provides noise/vibration data.
Guidelines for maintaining a safe and clean work environment.
Precautions related to electrical connections and grounding.
Advice on staying alert, using PPE, and preventing accidental starts.
Guidance on appropriate clothing and handling of moving parts.
Instructions on correct usage, maintenance, and storage.
Guidelines for charging, using, and caring for battery packs.
Key safety points for using the hammer drill driver.
Instructions for safe handling, charging, storage, and disposal of battery cartridges.
Step-by-step guide for attaching and detaching the battery.
Explanation of the protection system that cuts off power when overloaded or low battery.
How to check the remaining battery charge using indicator lamps.
LED display for checking battery charge levels in specific regions.
Instructions for operating the switch trigger and ensuring proper function.
How to use the tool's integrated lamp and its behavior when overheated.
How to change the direction of rotation and use the neutral position.
Instructions for selecting between high and low speed settings.
Guide to choosing between rotation, hammering, and clutch modes.
How to set the torque adjustment ring for screwdriving operations.
Steps for attaching the side grip for improved control and safety.
Procedure for inserting and securing bits in the chuck.
How to attach the bit holder for convenient bit storage.
Guide for fitting the depth rod to drill holes of uniform depth.
Instructions for attaching the hook for temporary tool hanging.
Safety precautions and techniques for hammer drilling operations.
Tips for effective hammer drilling, clearing clogs, and handling bit breakthrough.
How to use the optional blow-out bulb to clean drilled holes.
Steps for proper screwdriving, including torque adjustment and pilot holes.
Techniques and tips for drilling in wood and metal materials.
Guidelines for tool maintenance and authorized repair services.
List of recommended accessories for use with the tool.
To Next Page
