To Next PageTo Next Page
Need help?Do you have a question about the Makita DHP485 and is the answer not in the manual?
General| Voltage | 18V |
|---|---|
| Max Torque (Hard) | 50 Nm |
| Chuck Capacity | 1.5 - 13 mm |
| No Load Speed (High) | 0 - 1, 900 rpm |
| No Load Speed (Low) | 0 - 500 rpm |
| Impact Rate (High) | 0 - 28, 500 ipm |
| Impact Rate (Low) | 0 - 7, 500 ipm |
| Drilling Capacity in Steel | 13 mm |
| Drilling Capacity in Wood | 38 mm |
| Drilling Capacity in Masonry | 13 mm |
| Model | DHP485 |
| Category | Drill |
| Battery Type | Lithium-Ion |
| Chuck Size | 13 mm |
| Length | 182 mm |
| Type | Cordless Combi Drill |
| No Load Speed | 0 - 500 / 0 - 1, 900 rpm |
| Max Torque | 50 Nm |
Lists compatible Makita battery cartridges for the tool.
Explains the tool's purpose for impact drilling and screw driving.
General safety advice to follow for all power tools to prevent injury.
Specific safety precautions for cordless hammer driver drills.
Covers disassembly, operation, short circuits, and damage prevention for battery cartridges.
Explains the system that automatically cuts off power to protect the tool and battery.
Explains how to select drilling, hammer drilling, or screwdriving modes.
Details on adjusting torque in 21 levels for various screw sizes.
Step-by-step guide for performing screwdriving tasks.
