To Next PageTo Next Page
Need help?Do you have a question about the Makita DHP482Z and is the answer not in the manual?
General| Soft grip | Yes |
|---|---|
| Chuck type | Keyless |
| Product design | Pistol grip drill |
| Number of gears | 2 |
| Torque settings | 21 |
| Sound power level | 93 dB |
| Chuck capacity (max) | 13 mm |
| Chuck capacity (min) | 1.5 mm |
| Sound pressure level | 82 dB |
| Idle speed (1st gear) | 600 RPM |
| Idle speed (2nd gear) | 1900 RPM |
| Impact rate (low speed) | 9000 bpm |
| Sound level uncertainty | 3 dB |
| Impact rate (high speed) | 28500 bpm |
| Drilling diameter in wood (max) | 38 mm |
| Vibration level (metal drilling) | 2.5 m/s² |
| Maximum torque (hard applications) | 62 N⋅m |
| Maximum torque (soft applications) | 36 N⋅m |
| Vibration level (concrete drilling) | 6 m/s² |
| Product color | Black, Blue |
| Uncertainty K | 1.5 m/s² |
| Battery charger included | No |
| Power source | Battery |
| Battery voltage | 18 V |
Weight and Dimensions| Depth | 198 mm |
|---|---|
| Width | 79 mm |
| Height | 238 mm |
| Weight | 1800 g |
Step-by-step instructions for safely installing and removing the battery cartridge, including checks for secure locking.
Describes how to operate the tool's switch trigger for starting, stopping, and controlling speed.
Instructions on how to open and close the chuck to insert or remove drill bits and driver bits.
Instructions on checking and replacing worn carbon brushes, ensuring proper installation and brush break-in.
