To Next PageTo Next Page
Need help?Do you have a question about the Makita DHP482RFJ and is the answer not in the manual?
General| Model | DHP482RFJ |
|---|---|
| Category | Drill |
| Type | Cordless Hammer Drill |
| Power Source | Battery |
| Voltage | 18V |
| Battery Type | Li-Ion |
| Chuck Size | 13 mm |
| Chuck Capacity | 1.5 - 13 mm |
| Max Torque | 62 Nm |
| Maximum Torque (S/H) | 62 Nm |
| Max. in steel | 13 mm |
| Max. in wood | 38 mm |
| Max. in masonry | 13 mm |
| Torque Settings | 21 + Drill |
| Weight | 1.8 kg |
| No Load Speed (Hi) | 1900 rpm |
| No Load Speed (Lo) | 600 rpm |
| Impacts per Minute (Lo) | 9000 bpm |
Details on tool's technical capabilities, measurements, model, and performance metrics.
Comprehensive safety advice for tool operation and specific scenarios like long drill bits.
Critical safety precautions for handling, charging, and using battery cartridges.
Step-by-step guide for safely inserting and removing the battery from the tool.
Explains automatic power cut-off for overload, overheat, and overdischarge protection.
Step-by-step guides for screwdriving, hammer drilling, and general drilling operations.
