Need help?Do you have a question about the Makita DHP489 and is the answer not in the manual?
General| Model | DHP489 |
|---|---|
| Category | Drill |
| Voltage | 18V |
| Battery Type | Lithium-Ion |
| Chuck Size | 13mm |
| No Load Speed (Lo) | 0 - 550 RPM |
| No Load Speed (Hi) | 0 - 2, 100 RPM |
| Impacts per Minute (Hi) | 0 - 31, 500 IPM |
| Type | Cordless |
Provides key specifications including drilling/fastening capacities, speeds, dimensions, weight, voltage.
Lists compatible Makita battery cartridges and chargers.
Explains key symbols like 'Read instruction manual' and battery types.
Details the tool's intended use for impact drilling, screwdriving, and drilling.
Presents typical A-weighted noise levels (LPA, LWA) and uncertainty according to EN62841-2-1.
Provides essential safety advice for operating power tools.
Details vibration emission values for different work modes and uncertainty.
Covers proper footing, dress, and using dust extraction.
Emphasizes wearing protective goggles and face shields.
States that the EC declaration of conformity is included as Annex A.
Guides on not forcing the tool, proper switch use, and storage.
Advises on checking for misalignment, keeping tools sharp, and using accessories correctly.
Instructions on charging, storage, and avoiding damage to battery packs.
Recommends using qualified personnel for repairs and replacement parts.
Emphasizes ear protection, firm footing, and keeping hands away from moving parts.
Advises on speed, starting, and pressure when using long drill bits.
Covers reading instructions, avoiding disassembly, and short-circuiting.
Guides on temperature limits, incineration, and proper disposal.
Warns against damaging batteries, notes transport regulations, and handling of contacts.
Instructs on using specified products and proper disposal procedures.
Provides advice on charging, overcharging, temperature, and storage.
Explains the procedure for inserting and removing the battery pack.
Explains how to check and interpret the battery indicator lamps.
Details overload, overheat, overdischarge, and other protection mechanisms.
Describes how to start, stop, and control speed using the switch trigger.
Explains the function of the electric brake and when to seek service.
Explains how to activate the front lamp and its behavior when overheated.
Guides on how to change speed settings using the lever and table of speeds.
Details how to use the reversing switch lever for forward, reverse, and neutral positions.
Explains how to select drilling, hammer drilling, or screwdriving modes.
Guides on setting the torque level using the adjusting ring and provides a table.
Instructions on how to insert and remove bits using the chuck sleeve.
Guides on attaching the side grip for stable handling.
Details how to install the adjustable depth rod and hook.
Provides advice on controlling the tool and avoiding damage from excessive speed reduction.
Details the process for screwdriving, including torque adjustment and bit insertion.
Explains how to perform hammer drilling, including torque setting and hole breakthrough precautions.
Provides tips for drilling in wood, recommending specific drill bits.
Details methods for drilling in metal, including center-punching and lubricants.
Offers advice on excessive pressure, stuck bits, workpiece securing, and battery discharge.
Emphasizes safety during maintenance and warns against using certain cleaning agents.
Lists recommended accessories and advises on using them for their stated purpose.
To Next Page
