To Next PageTo Next Page
Need help?Do you have a question about the Makita DHP480Z and is the answer not in the manual?
General| Model | DHP480Z |
|---|---|
| Category | Drill |
| Type | Cordless Hammer Drill |
| Voltage | 18V |
| Battery Type | Li-ion |
| Chuck Capacity | 13mm |
| Max. in steel | 13 mm |
| Max. in wood | 38 mm |
| Max. in masonry | 13 mm |
| Weight | 1.8 kg |
| Torque Settings | 21 + Drill |
Safety instructions and precautions for handling battery cartridges, including disassembly and short-circuiting.
Step-by-step guide for inserting and removing the battery cartridge, ensuring proper lock.
Instructions on how to start, stop, and control tool speed using the switch trigger.
Choosing between drilling, hammer drilling, and screwdriving modes using the action mode ring.
Steps and precautions for performing hammer drilling, including bit selection and pressure.
Procedure for driving screws, including torque setting and speed control.
