To Next PageTo Next Page
Need help?Do you have a question about the Makita GA7911 and is the answer not in the manual?
General| Voltage | 120 V |
|---|---|
| Type | Angle Grinder |
| Lock-On Switch | Yes |
| Dust Port | No |
| Arbor | 5/8 inch |
| Spindle Thread | 5/8 inch - 11 UNC |
| Power Source | Corded |
Presents key technical data including No load speed, Overall length, Net weight, and Spindle thread.
Lists 13 crucial safety precautions for operating power tools, covering work area, children, tool usage, and maintenance.
Covers checks for keys, unintentional starting, outdoor extension cords, alertness, damaged parts, and grounding.
Warns about connecting the tool to power sources with incorrect voltage, potential for injury or damage.
Explains the purpose of grounding for electric shock reduction and proper connection procedures.
Illustrates different grounding methods using figures A, B, and C to ensure safe electrical connection.
Rules for checking sanding pads, holding the tool, avoiding rotating parts, and handling hot workpieces.
Rules for guards, wheel speed, wheel inspection, flanges, sparks, and hot workpieces.
Instructions on securely attaching the auxiliary side grip to the tool body.
Steps for safely mounting and dismounting abrasive discs, including using the shaft lock.
Details on starting, stopping, and locking the trigger switch for continuous operation.
Guidance on holding the tool, applying pressure, and maintaining a 15° angle for effective sanding.
Lists required guard assemblies and accessory kits for depressed center wheels.
Steps for safely mounting and dismounting grinder wheels, using flanges and the shaft lock.
Explains how to apply the wheel to the workpiece at a 15° angle and break-in procedures.
Crucial warnings about avoiding excessive pressure, wheel breakage, and using worn-out wheels.
Instructions for checking, replacing, and cleaning carbon brushes using a screwdriver.
Recommends using authorized service centers for repairs and maintenance to ensure safety and reliability.
Lists various sanding accessories like rubber pads, abrasive discs, and lock nuts with part numbers.
Details the guard assembly parts and sizes required for grinder use.
Lists different types of depressed center wheels, Makita zirconate, best edge wheels, and associated flanges.
Details flexible grinding wheels, wire cup brushes, lock nut wrenches, grips, and accessory kits.
An exploded view illustrating all the components of the Sander Model GA7911.
A detailed list of machine parts with item numbers, quantities, and descriptions for the Sander GA7911.
Outlines the warranty coverage, exclusions, and limitations for Makita tools.
