Need help?Do you have a question about the Makita BO4555 and is the answer not in the manual?
General| Power | 200 W |
|---|---|
| Type of sander | Orbital sander |
| Cable length | 2 m |
| Power source | AC |
| AC input voltage | 230 V |
| Eccentricity | 0.75 mm |
| Oscillating orbit diameter | 1.5 mm |
| Idle oscillation rate (max) | 14000 OPM |
Weight and Dimensions| Depth | 131 mm |
|---|---|
| Width | 112 mm |
| Height | 142 mm |
| Weight | 1100 g |
| Sanding plate size (WxD) | 112 x 102 mm |
Explanation of symbols used for the equipment. Ensure understanding before use.
Details the intended application of the tool for sanding wood, plastic, metal, and painted surfaces.
Information on connecting the tool to a single-phase AC supply and double insulation compliance.
Instructions for attaching and securing abrasive paper to the sander's base.
Details on how to start and stop the power tool using its switch.
Steps for correctly attaching the paper dust bag to the dust bag holder.
Guidance on proper sanding technique, pressure, and tool handling.
To Next Page
