Makita BO4550 User Manual

Finishing
Pad size
112mmxlOOmm
(4-3/8" x 4")
Sander
No load speed lOPMl
14,000
Dimensions (L x W x H)
11 5 mm x 112 mm x 130 mm
(4-112" x 4-318" x 5-118")
Net weight
0.95 kg
(2.1
lbsl
MODEL BO4550
MODEL BO45502
Without dust bag
and punch plate
INSTRUCTION MANUAL
DOUBLE
INSULATION
SPEC IF1 CAT1 ONS
Manufacturer reserves the right to change specifications without notice.
Note: Specifications may differ from country to country.

Makita BO4550 Specifications

General

Abrasive Paper Size	4-1/2" x 5-1/2"
Power Type	Corded
AMPS (120V)	2.0 AMPS
Power	240 Watts
Cable length	6 ft

Summary

Important Safety Instructions

General Safety Precautions

Essential safety guidelines for electric tool operation, covering work area, personal protection, and cord safety.

Additional Safety Rules

Specific safety directives for tool handling, including securing work, holding firmly, and avoiding wet conditions.

Operating the Finishing Sander

Attaching Abrasive Paper

Step-by-step guide on how to correctly attach and secure abrasive paper to the sander.

Punch Plate and Dust Bag Setup

Instructions for preparing sandpaper with a punch plate and attaching the dust collection bag.

Switch Action and Operation Guide

How to operate the sander, including starting, stopping, and proper sanding techniques.

Tool Maintenance and Care

Procedures for maintaining the tool, such as checking carbon brushes and seeking authorized service.

Optional Accessories

Abrasive Papers and Attachments

Information on available abrasive papers, dust bags, and punch plates for enhanced tool functionality.

Makita Limited One Year Warranty