Need help?Do you have a question about the Makita BO4510 and is the answer not in the manual?
General| Orbits Per Minute | 12, 000 OPM |
|---|---|
| No-load speed | 12, 000 RPM |
| Power | 240 watts |
| Cable length | 8.2 ft |
| Abrasive Paper Size | 4 x 5 inches |
| AMPS | 2.0 A |
| Sanding pad size | 4 x 5 inches |
Symbol indicating the need to consult the instruction manual before use.
Symbol indicating the tool is double insulated for electrical safety.
Symbol for proper disposal of electrical equipment in EU countries, following environmental regulations.
Keep work area clean, well lit, free from flammable atmospheres, and clear of bystanders.
Follow guidelines on plug matching, earthed surfaces, wet conditions, cord care, and extension cords.
Stay alert, use PPE, prevent unintentional starting, maintain balance, dress properly, and use dust extraction.
Use correct tools, check switch, disconnect power before adjustments, store safely, and maintain tools.
Have tools serviced by qualified personnel using identical replacement parts for safety and reliability.
Use safety glasses, hold tool firmly, operate hand-held, avoid water, ventilate area, and use respiratory protection.
Be cautious of toxic chemicals in materials, prevent dust inhalation, and check for pad cracks before use.
Check tool is off before plugging in. Slide switch to ON (1) to start, OFF (O) to stop. Can be locked ON.
Pull clamp lever, insert paper, center, align edges, and secure paper for proper tension.
Never run without paper. Do not force. Hold firmly, turn on, wait for speed, then place gently on surface.
Always ensure tool is off and unplugged. Do not use solvents. Repairs by authorized centers only.
Use only recommended accessories for safety. Consult service center for details.
To Next Page
