Makita HM1203C User Manual

8
1
2
3
009954
Connect the connector firmly and then reinstall the
handle.
CAUTION:
• Be careful not to damage the connector or lead
wires especially when installing the handle.
To maintain product SAFETY and RELIABILITY, repairs,
carbon brush inspection and replacement, any other
maintenance or adjustment should be performed by
Makita Authorized Service Centers, always using Makita
replacement parts.
ACCESSORIES
CAUTION:
• These accessories or attachments are
recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons. Only use accessory or
attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
• Bull point(SDS-max)
• Cold chisel(SDS-max)
• Scaling chisel(SDS-max)
• Clay spade(SDS-max)
• Bit grease
• Safety goggles
• Hammer grease
• Plastic carrying case
1. Connector
2. White
3. Black

Makita HM1203C Specifications

General

Input power	1510 W
Impact energy (max)	19.1 J
Vibration level (chiseling)	15.5 m/s²
Toolholder	12 mm
Impact rate	1950 bpm
Product color	Black, Blue

Weight and Dimensions

Depth	128 mm
Width	576 mm
Height	265 mm
Weight	9700 g