Need help?Do you have a question about the Makita HM1307C and is the answer not in the manual?
General| Type | Demolition Hammer |
|---|---|
| Bit Size | 1-1/8 inches |
| Vibration Control | Yes |
| Anti-Vibration Technology | Yes |
| Handle Type | D-Handle |
| Input wattage | 1, 500W |
| Power Source | Corded Electric |
| Amperage | 15.0 |
| Vibration K factor | 1.5 m/sec² |
Read all safety warnings and instructions to prevent electric shock, fire, and serious injury.
Covers safe operation practices, electrical precautions, and personal protective measures for tool use.
Specific safety precautions for operating hammer tools, including noise and handling.
Details model numbers, blows per minute, length, weight, and safety class.
Explains safety symbols, defines the tool's intended purpose, and outlines power supply requirements.
Provides A-weighted noise levels and vibration total values according to EN60745 standards.
Describes the tool's functions and how to operate the power switch and lever.
Explains how to adjust the blow speed using the dial and the function of indicator lamps.
Details how to attach the side handle and install/remove various types of bits.
Guides on how to perform chipping, scaling, and demolition tasks safely and effectively.
Outlines periodic grease replacement for tool longevity and service recommendations.
Lists accessories recommended for use with the electric breaker for optimal performance and safety.
To Next Page
