Need help?Do you have a question about the Makita HP2041 and is the answer not in the manual?
General| Type | Hammer Drill |
|---|---|
| Voltage | 240 V |
| Chuck Size | 13 mm |
| Chuck Type | Keyless |
| Max. drilling diameter in concrete | 20 mm |
| Max. drilling diameter in steel | 13 mm |
| Max. drilling diameter in wood | 40 mm |
| No Load Speed (Hi) | 2, 900 rpm |
| Impact Rate (Hi) | 44800 bpm |
Lists and illustrates the numbered parts of the power tool for identification.
Provides technical details such as model, speed, capacities, and weight.
Explains tool symbols, intended use, and power supply requirements.
Offers fundamental safety advice applicable to all power tools.
Outlines essential safety precautions for the user's well-being.
Provides guidelines for correct usage and maintenance of power tools.
Details critical safety rules specific to this power tool.
Explains how to operate the switch trigger for starting, stopping, and continuous operation.
Details how to change rotation direction and select speed ranges.
Instructs on how to select between drilling and hammer drilling modes.
Guides on attaching the auxiliary side grip and using the depth gauge.
Provides instructions on how to insert and remove drill bits from the chuck.
Details the procedure and precautions for performing hammer drilling.
Covers general drilling, including wood and metal drilling techniques.
Explains cleaning vent holes and lists recommended optional accessories.
To Next Page
