Need help?Do you have a question about the Makita HP2040 and is the answer not in the manual?
General| Type | Hammer Drill |
|---|---|
| Voltage | 240 V |
| No Load Speed (Hi) | 2, 800 rpm |
| Chuck Capacity | 1.5 - 13 mm |
| Chuck Type | Keyless |
| Chuck Size | 13 mm |
| Max Drilling Diameter in Concrete | 20 mm |
| Max Drilling Diameter in Steel | 13 mm |
| Max Drilling Diameter in Wood | 40 mm |
| Impact Rate (Hi) | 44, 800 bpm |
Keep work area clean and well lit to prevent accidents.
Follow guidelines for safe use of electricity and polarized plugs.
Stay alert, dress properly, avoid accidental starting, and maintain balance.
Guidance on performing hammer drilling, including safety and techniques.
To Next Page
