To Next PageTo Next Page
Need help?Do you have a question about the Makita HP2051FJ and is the answer not in the manual?
General| Input power | 720 W |
|---|---|
| Power source | AC |
| Number of gears | 2 |
| Idle speed (max) | - RPM |
| Sound power level | 102 dB |
| Idle speed (1st gear) | 1200 RPM |
| Idle speed (2nd gear) | 2900 RPM |
| Drilling diameter in wood (max) | 40 mm |
| Drilling diameter in steel (max) | 13 mm |
| Vibration level (metal drilling) | 2.5 m/s² |
| Drilling diameter in concrete (max) | - mm |
| Chuck type | Keyless |
| Hammer drilling | Yes |
Weight and Dimensions| Depth | 70 mm |
|---|---|
| Width | 360 mm |
| Height | 220 mm |
| Weight | 5500 g |
Specific safety advice for operating hammer drills, emphasizing ear protection and proper handling.
Explains how to start, stop, and operate the tool continuously using the switch trigger and lock button.
Instructions on how to operate the built-in lamps on specific models, with a caution about direct viewing.
Details on using the reversing switch lever to change rotation direction, with a caution to stop the tool first.
Describes how to preselect between two speed ranges using the speed change knob, with operational cautions.
Explains how to use the action mode change lever for hammer drilling or rotation-only modes.
Instructions for attaching the auxiliary handle for improved safety and control during operation.
Step-by-step guide for inserting and removing drill bits using the chuck key or sleeve mechanism.
Guidance on using the depth gauge accessory to ensure uniform hole depths during drilling.
Guidance on performing hammer drilling in hard materials, emphasizing grip and control during breakthrough.
Instructions for drilling without hammering in various materials, with cautions against excessive pressure.
Advice on regularly cleaning the tool's air vents to prevent obstruction and maintain performance.
List of recommended accessories for use with the tool, emphasizing safety and proper application.
Presents typical A-weighted noise level data according to EN60745, including sound pressure and power levels.
Details vibration emission values for different work modes, measured according to EN60745 standards.
