Need help?Do you have a question about the Makita HP2051 and is the answer not in the manual?
General| Chuck type | Keyless |
|---|---|
| Adjustable speed | Yes |
| Idle speed (1st gear) | 1200 RPM |
| Idle speed (2nd gear) | 2900 RPM |
| Impact rate (high speed) | 58000 bpm |
| Drilling diameter in wood (max) | 40 mm |
| Drilling diameter in aluminum (max) | 13 mm |
| Input power | 720 W |
| Power source | AC |
Weight and Dimensions| Depth | 70 mm |
|---|---|
| Width | 360 mm |
| Height | 220 mm |
| Weight | 2500 g |
Covers safety related to the work area, alertness, and personal protective equipment.
Critical instructions on preventing electric shock, including plug and cord safety.
Key safety points for operating the hammer drill, including footing and handling.
Step-by-step guide for fitting and removing drill bits for different models.
Detailed steps and safety advice for performing hammer drilling operations.
To Next Page
