Need help?Do you have a question about the Makita HP2070 and is the answer not in the manual?
General| Type | Hammer Drill |
|---|---|
| Power Source | Corded Electric |
| Voltage | 230 V |
| No Load Speed (Hi) | 0 - 2900 rpm |
| Chuck Capacity | 1.5 - 13 mm |
| Chuck Type | Keyless |
| Max. Drilling Diameter in Steel | 13 mm |
| Max. Drilling Diameter in Wood | 40 mm |
Details on sound pressure and power levels, advising ear protection.
Measured vibration levels for impact and metal drilling, with safety warnings.
Guidance on maintaining a clean work area and general safe operating practices.
Precautions for electrical connections, cord usage, and protection against shocks.
Advice on staying alert, using PPE, and preventing unintentional tool starts.
Instructions on removing keys, proper dressing, dust extraction, and correct tool usage.
Guidance on maintaining the tool, keeping cutting edges sharp, and proper storage.
Advice on professional servicing, lubrication, and using genuine replacement parts.
Key safety measures for hammer drill use, including grip, footing, and impact drilling.
Explanation of how to operate the switch trigger and use the speed adjusting dial.
Instructions for using the lamp feature on specific models.
How to change the direction of rotation using the reversing switch.
How to select between the two speed ranges using the speed change knob.
How to switch between hammer drilling and rotation-only modes.
Instructions for attaching and positioning the auxiliary handle for safe operation.
Procedures for securely fitting and removing drill bits using the chuck key or sleeve.
Detailed steps and safety precautions for hammer drilling in hard materials.
Instructions for using the optional blow-out bulb to clear dust from holes.
Guidance for drilling in wood, metal, and plastic, including specific techniques.
Importance of keeping the tool's air vents clean for proper function and longevity.
Explanation of the Power-ON and Service indicator lamps and their meanings.
List of recommended accessories and their intended use for the tool.
To Next Page
