Makita HP330D User Manual

1
ENGLISH (Original instructions)
INSTRUCTION MANUAL
IMPORTANT: Read Before Using.
Cordless Hammer Driver Drill
HP330D
012913

Makita HP330D Specifications

General

Type	Hammer Drill
Battery Type	Lithium-ion
Max. drilling diameter in steel	13 mm
Max. drilling diameter in wood	30 mm
Chuck Capacity	13 mm
No Load Speed (Hi)	0 - 1300 RPM
No Load Speed (Lo)	350 rpm
Blows per Minute (Hi)	0 - 19, 500 BPM

Summary

Symbols and Intended Use

Intended Use

Defines the tool's purpose for impact drilling and screw driving.

General Power Tool Safety Warnings

Personal Safety

Power Tool Use and Care

Specific Safety Warnings

Hammer Driver Drill Safety

Critical safety warnings for operating the cordless hammer driver drill.

Battery Cartridge Safety Instructions

Handling and Storage

Precautions for handling, storage, and avoiding damage to battery cartridges.

Functional Description and Operation

Installing or Removing Battery Cartridge

Mode Selection and Torque Adjustment

Selecting the Action Mode

How to choose between rotation only, hammering, or clutch modes.

Adjusting the Fastening Torque

Steps to adjust the torque setting for different applications.

Assembly and Operation

Installing or Removing Driver Bit

Specific Drilling and Screwdriving Operations

Hammer Drilling Operation

Technique for effective hammer drilling and handling potential issues.

Drilling Operation (General)

Screwdriving Operation

Instructions for driving screws, including torque adjustment and clutch use.