Need help?Do you have a question about the Makita HP332D and is the answer not in the manual?
General| Number of gears | 2 |
|---|---|
| Torque settings | 21 |
| Chuck capacity (min) | 1 mm |
| Sound pressure level | 82 dB |
| Idle speed (1st gear) | 450 RPM |
| Idle speed (2nd gear) | 6750 RPM |
| Impact rate (low speed) | 1500 bpm |
| Sound level uncertainty | 3 dB |
| Impact rate (high speed) | 22500 bpm |
| Drilling diameter in wood (max) | 28 mm |
| Vibration level (metal drilling) | 2.5 m/s² |
| Maximum torque (hard applications) | 35 N⋅m |
| Maximum torque (soft applications) | 21 N⋅m |
| Drilling diameter in concrete (max) | 10 mm |
| Vibration level (concrete drilling) | 12.5 m/s² |
| Soft grip | Yes |
| Product design | Pistol grip drill |
| Product color | Black, Blue |
| Uncertainty K | 1.5 m/s² |
| Number of batteries included | 2 pc(s) |
| Power source | Battery |
| Battery voltage | 10.8 V |
| Battery capacity | 4 Ah |
Weight and Dimensions| Depth | 168 mm |
|---|---|
| Width | 66 mm |
| Height | 236 mm |
| Weight | 1300 g |
Explains the meaning of symbols used on the equipment.
Defines the tool's purpose for impact drilling, screw driving, and drilling.
Details the A-weighted noise levels and recommends ear protection.
Provides vibration emission values for impact drilling and metal drilling.
Confirms compliance with relevant European Directives.
Guidelines for maintaining a clean, well-lit, and safe work environment.
Precautions for safe use of electrical connections and preventing shock.
Advice on operator awareness, protective equipment, and preventing accidents.
Instructions for proper operation, maintenance, and storage of power tools.
Guidelines for charging, using, and handling battery packs safely.
Recommendations for professional servicing and keeping the tool in good condition.
Essential safety advice for operating the hammer drill, including hearing protection.
Rules for safe handling, charging, and storage of battery cartridges.
Advice on optimal charging practices to prolong battery lifespan.
Step-by-step guide for fitting and removing the battery.
Explains the system that automatically cuts off power to extend battery life.
How to check the battery charge level using indicator lamps.
How to start, stop, and control speed using the switch trigger.
Details on how the front lamp activates and deactivates with the trigger.
Explanation of the reversing switch for forward and reverse operation.
Guide on how to change between speed settings for different loads.
How to choose between drilling, hammer drilling, and screwdriving modes.
Guide to setting the appropriate torque for screwdriving tasks.
Steps for fitting and removing drill bits and driver bits from the chuck.
How to attach the accessory hook for temporary hanging of the tool.
Instructions for fitting the driver bit holder accessory.
Proper grip technique for controlling the tool during operation.
Guidance on performing screwdriving tasks correctly, including torque adjustment.
Steps for performing hammer drilling, including bit selection and handling breakthrough.
How to use the blow-out bulb to clear dust from holes.
Tips for drilling in wood using guide screws for easier operation.
Techniques for drilling metal, including lubrication and preventing bit slippage.
Instructions for using the tool in a basic screwdriver mode.
How to properly attach and secure the tool in the holster.
Guidelines for tool inspection, maintenance, and authorized repair.
List of recommended accessories and precautions for their use.
To Next Page
