Need help?Do you have a question about the Makita HR2631F and is the answer not in the manual?
General| Type | Drilling hammer |
|---|---|
| Drilling | Yes |
| Chuck type | SDS Plus |
| Head material | - |
| Product color | Black, Blue |
| Cord length | 2.5 m |
| Input power | 800 W |
| Power source | AC |
| Impact rate | 4600 bpm |
| Idle speed (max) | 1200 RPM |
| Rated speed (max) | - RPM |
| Drilling diameter in wood (max) | 32 mm |
| Drilling diameter in steel (max) | 13 mm |
| Drilling diameter in stone (max) | 26 mm |
| Drilling diameter in concrete (max) | - mm |
Weight and Dimensions| Depth | 77 mm |
|---|---|
| Width | 361 mm |
| Height | 209 mm |
| Weight | 2900 g |
Explains the meaning of symbols used on the equipment.
Describes the primary and secondary applications of the tool.
Details electrical connection requirements and double insulation.
Provides A-weighted noise level data for different models.
Lists vibration emission values for various work modes and models.
Specifies the machine designation and model numbers covered by the declaration.
Lists the European Directives the machine conforms to.
Details the standards or documents used in manufacturing.
Provides information on where the technical file is available.
Focuses on maintaining a safe and clean work environment.
Outlines essential electrical safety measures to prevent shock.
Details how operators should protect themselves during use.
Covers proper operation, maintenance, and disconnection procedures.
Covers tool servicing by qualified personnel and part replacement.
Emphasizes wearing ear protection to prevent hearing loss.
Covers using auxiliary handles, insulated grips, and maintaining balance.
Recommends safety helmet, glasses, face shield, dust mask, and gloves.
Stresses securing the bit, checking screws, and proper tool operation.
Advises caution with chemicals and dust.
How to operate the main switch trigger and lock button.
Instructions for using and maintaining the tool's lamp.
Guide to changing the rotation direction of the tool.
Instructions for removing and attaching SDS-plus chucks.
Guide to choosing between hammering, rotation, and chipping modes.
Explanation of the torque limiter and its activation.
How to use the tool's temporary hanging hook.
Guide to attaching and adjusting the auxiliary side grip.
How to install bits and apply necessary grease.
Procedure for setting the bit angle for chipping operations.
Guide to setting up and using the depth gauge for precise drilling depth.
How to use the dust cup for dust prevention during drilling.
Step-by-step guide for attaching and detaching the dust cup.
Proper techniques for hammer drilling into hard materials.
How to perform chipping and demolition tasks.
Procedures for drilling into softer materials like wood and metal.
Guide to installing and using the quick change drill chuck.
Specific instructions and precautions for diamond core drilling.
How to operate the tool with the dust cup attached.
Safety guidelines for performing inspection and maintenance.
Recommends using authorized service centers for repairs.
Lists recommended accessories for use with the tool.
To Next Page
