To Next PageTo Next Page
Need help?Do you have a question about the Makita HR2631FT and is the answer not in the manual?
General| Cord length | 2.5 m |
|---|---|
| Input power | 800 W |
| Output power | 400 W |
| Power source | AC |
| Rated speed (max) | 4600 RPM |
| Sound power level | 101 dB |
| Impact energy (max) | 2.4 J |
| Sound pressure level | 90 dB |
| Sound level uncertainty | 3 dB |
| Drilling diameter in wood (max) | 32 mm |
| Drilling diameter in steel (max) | 13 mm |
| Drilling diameter in concrete (max) | 26 mm |
| Reverse | Yes |
| Chuck type | SDS Plus |
| Product color | Black, Blue |
Weight and Dimensions| Depth | 385 mm |
|---|---|
| Width | 77 mm |
| Height | 209 mm |
| Weight | 3100 g |
Explains how to operate the switch trigger for starting, stopping, and continuous operation.
Details how to turn on the LED lamp using the switch trigger and maintenance for the lens.
Describes how to change the tool's rotation direction using the reversing switch lever.
Explains the process of removing and attaching SDS-plus quick change chucks and drill chucks.
Instructions for installing and positioning the auxiliary side grip for safe operation.
Step-by-step guide on how to insert and remove bits securely into the chuck.
Instructions on how to install and adjust the depth gauge for uniform drilling depth.
Details on how to perform hammer drilling, including safety and handling during breakthrough.
Instructions for performing chipping, scaling, and demolition tasks, emphasizing firm grip and light pressure.
How to drill in wood or metal using the appropriate chuck and technique, with safety precautions.
Precautions for diamond core drilling, emphasizing the use of 'rotation only' mode to avoid bit damage.
