Need help?Do you have a question about the Makita HR3540C and is the answer not in the manual?
General| Chuck Type | SDS-Max |
|---|---|
| Drilling Capacity (Steel) | 13 mm |
| Type | Rotary Hammer |
| Power Source | Corded |
| No Load Speed | 0-1100 rpm |
Details on model variants, capacities, speed, weight, and dimensions.
Explanation of symbols, intended use, and power supply requirements.
A-weighted noise levels and vibration emission values for each model.
Manufacturer's declaration of compliance with European directives and standards.
Comprehensive safety instructions covering work area, electrical, and personal safety.
How to operate the switch trigger and the function of indicator lamps.
How to adjust speed and select between rotation, hammering, and chipping modes.
Explanation of the torque limiter and its behavior during operation.
Understanding indicator lights and procedures for installing/removing bits.
How to install the side grip and adjust the bit angle for specific tasks.
Using the depth gauge and performing hammer drilling, chipping, and general drilling.
Using optional chucks, diamond core drilling, and basic maintenance procedures.
Information on lubrication requirements and a list of compatible accessories.
To Next Page
