Makita JR3060T User Manual

2
ENGLISH
SPECIFICATIONS
Model JR3060T JR3070CT
Length of stroke 32 mm
Pipe 130 mm
Max. cutting capacities
Wood 255 mm
Strokes per minute (min
-1
) 0 - 2,800
Overall length 485 mm
Net weight 4.4 kg 4.6 kg
Safety class /II
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
END201-5
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･ Read instruction manual.
･ DOUBLE INSULATION
･ Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic equipment and its
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an environmentally compatible
recycling facility.
ENE021-1
Intended use
The tool is intended for sawing wood, plastic, metal and
building materials with a strong impact. It is suitable for
straight and curved cutting.
ENF002-1
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated in accordance with European
Standard and can, therefore, also be used from sockets
without earth wire.
For Model JR3060T
ENG102-3
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
pA
) : 87 dB(A)
Sound power level (L
WA
) : 98 dB(A)
Uncertainty (K) : 3 dB(A)
Wear ear protection
ENG220-2
Vibration
The vibration total value (tri-axial vector sum)
determined according to EN60745:
Work mode : cutting wood
Vibration emission (a
h,CW
) : 23.5 m/s
2
Uncertainty (K) : 2.0 m/s
2
For Model JR3070CT
ENG102-3
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
pA
) : 88 dB(A)
Sound power level (L
WA
) : 99 dB(A)
Uncertainty (K) : 3 dB(A)
Wear ear protection
ENG220-2
Vibration
The vibration total value (tri-axial vector sum)
determined according to EN60745:
Work mode : cutting wood
Vibration emission (a
h,CW
) : 8.5 m/s
2
Uncertainty (K) : 1.5 m/s
2

Makita JR3060T Specifications

General

Type	Corded
Noise level	98 dB
Dimensions (WxDxH)	485 x 99 x 181 mm
Vibration emission	23.5 m/s²
Input power	1250 W
Power source	AC
Stroke length	32 mm
Cutting depth in wood	255 mm
Idle stroke rate (max)	2800 spm
Cutting depth in metal profiles/pipes	130 mm
Product color	Black, Blue

Weight and Dimensions

Depth	99 mm
Width	485 mm
Height	181 mm
Weight	4200 g