Makita LC06 - MAINTENANCE

9 ENGLISH
Cleaning (Suction)
Nozzle
Attach the nozzle to clean off tables, desks, furniture,
etc.Thenozzleslipsoneasily.
1
►1. Nozzle
Nozzle + Extension wand (Straight
pipe)
Theextensionwandtsinbetweenthenozzleandthe
cleaneritself.Thisarrangementisconvenientforclean-
ingaoorinastandingposition.
1
2
3
►1. Cleaner body 2.Extensionwand3. Nozzle
Corner nozzle
Fit on the corner nozzle for cleaning corners and crev-
ices of a car or furniture.
2
1
►1. Corner nozzle 2. Cleaner body
Corner nozzle +Extension wand
(Straight pipe)
Intightquarterswherethecleaneritselfcannot
squeeze in, or in high places hard to reach, use this
arrangement.
3
2
1
►1. Corner nozzle 2.Extensionwand3. Cleaner body
Cleaning without nozzle
You can pick up powder and dust without nozzle.
MAINTENANCE
CAUTION: Always be sure that the tool is
switched off and the battery cartridge is removed
before attempting to perform inspection or
maintenance.
NOTICE: Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
cracks may result.
After use
NOTICE: Putting the cleaner against the wall
without any other support cause the cleaner to
fall down and be damaged.