Need help?Do you have a question about the Makita LC08 and is the answer not in the manual?
Details the cleaner's model and dust capacity.
Specifies operating time at different speed settings.
Covers overall length, rated voltage, and net weight.
Lists compatible battery cartridges and chargers.
Provides crucial safety precautions for operating the appliance.
Clarifies the appliance is for household use only.
Lists materials that should not be vacuumed due to safety risks.
Defines symbols for volts and direct current.
Covers reading instructions, no disassembly, and proper handling.
Details safe storage temperatures, no incineration, and avoiding damage.
Emphasizes using specified products and following disposal rules.
Recommends charging before full discharge and avoiding overcharging.
Specifies the recommended temperature range for charging batteries.
Caution for tool safety before adjusting or checking functions.
Warning about potential finger injury when loading battery.
Instructions to switch off tool and grip firmly during battery handling.
Explains automatic power cut-off for overload or low battery voltage.
Details how indicator lamps show remaining battery capacity.
Instructions for turning the built-in lamp on and off.
How to start the cleaner and change between speed modes.
Safety reminder to switch off tool and remove battery before assembly.
Illustrates the components of the normal filter system.
Note about using a garbage bag when opening the capsule.
Caution to empty cleaner when it's too full to maintain suction.
Caution to empty dust from inside cleaner to prevent motor damage.
Instruction to tap capsule to dislodge dust from the filter.
Procedure for removing the prefilter from the cleaner unit.
Instructions for cleaning the prefilter and filter.
Instruction to tap capsule to dislodge dust from the filter.
Procedure for removing the high performance filter.
Steps for reassembling the normal filter system.
Notice on correct filter placement to prevent motor failure.
Instructions for installing the prefilter correctly.
Procedure for installing the dust capsule securely.
Illustrates incorrect assembly with only prefilter installed.
Illustrates incorrect assembly with only filter installed.
Illustrates incorrect filter installation where it's peeled back.
Notice emphasizing correct filter and prefilter loading for motor protection.
Illustrates incorrect prefilter installation with loose securing lip.
Instructions for connecting and securing the high performance filter.
Illustrates loose securing lip on high performance filter.
Caution on connecting and disconnecting attachments correctly.
Describes the use of extension wand for floor cleaning.
Instructions on attaching the nozzle for cleaning surfaces.
Instructions for using the corner nozzle in tight spaces.
Describes using corner nozzle with extension for hard-to-reach areas.
Explains cleaning capability without a nozzle attachment.
Instructions for cleaning the exterior of the cleaner body.
Safety caution before performing maintenance or inspection.
Notice about proper storage to prevent damage from falling.
Instructions for washing and drying the filter.
Warning against using harsh solvents for cleaning.
Warning against using air dusters on cleaners and filters.
Instruction to thoroughly dry filters after washing.
Instruction to re-install filters before use to prevent malfunction.
Instructions for cleaning a dirty sponge filter.
Instructions for correctly inserting and positioning the sponge filter.
Troubleshooting steps for weak suction power.
Troubleshooting steps for when the appliance is not working.
Caution against attempting self-repair of the cleaner.
Caution on using recommended accessories and their proper use.
Advice on seeking assistance for accessory details from a service center.
Lists various optional accessories available for the tool.
Directs users to warranty sheets and websites for details.
General| Brand | Makita |
|---|---|
| Model | LC08 |
| Category | Ultrasonic Jewelry Cleaner |
| Language | English |
To Next Page
