Need help?Do you have a question about the Makita LD060P and is the answer not in the manual?
General| Accuracy | ±1.5 mm |
|---|---|
| Units of Measurement | m / in / ft |
| Laser Class | Class 2 |
| Power Source | 2 x AAA batteries |
| Laser Type | 635 nm, <1mW |
| Protection Class | IP54 |
| Auto Power Off | Yes |
| Measuring Range | 0.2 - 60 m |
| Operating Temperature | 0 to 40 °C |
Explains WARNING, CAUTION, and important paragraph symbols for safe operation.
Details permitted uses like measuring distances and adverse uses to avoid.
Specifies operational environment and prohibited areas for the device.
Outlines duties of Makita, accessory makers, and instrument supervisors.
Details the buttons and their corresponding functions for operating the device.
Explains the meaning of various icons and data shown on the device's display.
Instructions for battery installation, replacement, and protection against corrosion.
How to select and change the desired measurement units (m, ft, etc.).
Using the CLEAR button to cancel and the illumination for display visibility.
Configuring the measurement reference (front, rear, or end piece).
Procedure for taking a single distance measurement using the laser.
How to perform continuous measuring and determine minimum/maximum distances.
How to add or subtract measured distances sequentially.
Steps to calculate the area of a surface using measured dimensions.
Procedure for combining or separating calculated area values.
How to calculate the volume of an object using measured dimensions.
Using the Pythagorean theorem to measure difficult-to-access distances.
Measuring distance using two additional reference measurements.
Measuring distance using three additional reference measurements.
Function for accurately staking out equal distances for construction.
Accessing and navigating through the last 10 stored measurement values.
How to integrate historical data into area, volume, or other calculations.
Using the self-timer for delayed and automatic distance measurements.
Instructions on how to disable or re-enable the device's audible beep.
Explains common error codes and provides steps for correction.
Detailed technical data including range, accuracy, dimensions, and battery life.
Specifies operating temperatures and electromagnetic compatibility information.
Compliance information and interference guidelines for the US market.
Details the laser class, potential hazards, and necessary eye protection.
Explanation of the labels and symbols affixed to the instrument.
Guidelines for proper cleaning and maintenance to preserve device functionality.
Instructions for environmentally responsible disposal of the device and batteries.
Statement confirming the product's compliance with European Union standards.
To Next Page
