EasyManuals Logo

Makita LS0714L User Manual

Makita LS0714L
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
11
For European countries
To prevent the switch trigger from being accidentally pulled, a lock-off button is
provided. To start the tool, push the lever to the left, press in the lock-off button
and then pull the switch trigger. Release the switch trigger to stop.
For all countries other than European countries
To prevent the switch trigger from being accidentally pulled, a lock-off button is
provided. To start the tool, press in the lock-off button and pull the switch trig-
ger. Release the switch trigger to stop.
WARNING:
NEVER use tool without a fully operative switch trigger. Any tool with an
inoperative switch is HIGHLY DANGEROUS and must be repaired before
further usage.
For your safety, this tool is equipped with a lock-off button which prevents
the tool from unintended starting. NEVER use the tool if it runs when you
simply pull the switch trigger without pressing the lock-off button. Return
tool to a Makita service center for proper repairs BEFORE further usage.
NEVER tape down or defeat purpose and function of lock-off button.
Lighting up the lamps
For model LS0714F, LS0714FL
CAUTION:
This is not a rainproof light. Do not wash the light in water or use it in a
rain or a wet area. Such a conduct can cause an electric shock and
fume.
Do not touch the lens of the light, as it is very hot while it is lighted or
shortly after it is turned off. This may cause a burn to a human body.
Do not apply impact to the light, which may cause damage or shorted
service time to it.
Do not keep casting the beam of the light to your eyes. This can cause
your eyes to be hurt.
Do not cover the light with clothes, carton, cardboard or similar objects
while it is lighted, which can cause a fire or an ignition.
Push the upper position of the switch for turning on the light and the lower
position for off.
Move the light to shift an area of lighting.
NOTE:
Use a dry cloth to wipe the dirt off the lens of lamp. Be careful not to
scratch the lens of light, or it may lower the illumination.
1. Lever
1
005517
1. Lock-off button
2. Switch trigger
3. Handle
2
3
1
002253
1. Light
2. Light switch
1
2
005518

Other manuals for Makita LS0714L

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Makita LS0714L and is the answer not in the manual?

Makita LS0714L Specifications

General IconGeneral
BrandMakita
ModelLS0714L
CategorySaw
LanguageEnglish

Related product manuals