Need help?Do you have a question about the Makita LS0714 and is the answer not in the manual?
General| Input power | 1010 W |
|---|---|
| Power source | AC |
| Blade bore | 20 mm |
| Blade diameter | 190.5 mm |
| Idle speed (max) | 6000 RPM |
| Bevel setting (left) | 45 ° |
| Miter setting (left) | 47 ° |
| Bevel setting (right) | 5 ° |
| Miter setting (right) | 57 ° |
| Cutting capacity 45° miter | 52 x 212 mm |
Weight and Dimensions| Depth | 672 mm |
|---|---|
| Width | 431.8 mm |
| Height | 457.2 mm |
| Weight | 13700 g |
Essential safety precautions for operating electric tools safely and preventing injury.
Detailed safety rules specific to the operation and handling of this saw.
Procedure for setting the desired miter angle for cuts.
Steps to adjust the saw blade's bevel angle for angled cuts.
How to use the laser line for cutting and associated safety precautions.
Step-by-step guide for safely changing the saw blade.
How to install and use the vertical vise to secure workpieces.
Instructions for using the optional horizontal vise for securing material.
Basic steps and considerations for performing cuts with the saw.
Procedure for making cuts on wider workpieces using the sliding feature.
How to re-align and adjust the miter and bevel angles.
Detailed steps for calibrating the miter angle to 0 degrees.
To Next Page
