Need help?Do you have a question about the Makita M3600 and is the answer not in the manual?
General| Power Input | 1650W |
|---|---|
| No Load Speed | 22, 000 RPM |
| Cable Length | 2.5 m |
| Base Type | Plunge |
| Depth Adjustment | Yes |
| Plunge Capacity | 0 - 60 mm |
Defines the tool's intended applications and requirements for safe electrical power connection.
Guidelines for operator alertness, protective equipment, maintaining a clean work area, and keeping others clear.
Instructions on proper plug usage, avoiding body contact with grounded surfaces, and protecting against water ingress.
Advice on using the correct tool, ensuring the switch functions, and safe storage practices.
Guidance on maintaining the tool, keeping cutting tools sharp, and using accessories correctly.
Critical safety warnings for router operation, including handling bits, workpiece securing, and proximity to moving parts.
Explains how to start and stop the tool using the switch lever.
Instructions for safely installing and removing router bits.
Step-by-step instructions for setting up and performing cuts with the router.
Guidance on workpiece positioning relative to the router bit for edge cutting.
Guidance on general maintenance, including replacing carbon brushes.
To Next Page
