PRODUCT
P 1/ 1
7
Mixed gasoline* Mixed E25 gasoline*
1.1
40.2
Models No.
Description
CONCEPT AND MAIN APPLICATIONS
Specification
Standard equipment
Optional accessories
RBC413U, RBC414U, RBC414UG
Petrol Brushcutter
Fuel tank capacity: L
Engine
Displacement: mL
Fuel
Max. torque (N·m)
2-stroke
RBC414U RBC414UGRBC413U
Type
Starting system Recoil starter
Handle style
Compliance with main exhaust
emission regulations; CARB Tier 3,
EPA Phase 2, EU Stage 2
Carburetor
No
Diaphragm
Model RBC413U is symmetric design bike handle style Petrol brushcutter
powered by 40.2 mL 2-stroke engine.
This product has been developed based on RBC411U, and Diaphragm
carburetor has been employed instead of the float type carburetor of RBC411U.
Other basic features are the same as RBC411U; therefore, the engine for
this model does not comply with well-known exhaust emission regulations.
Net weight**: kg (lbs)
* 2 cycle engine oil is required in the correct mixture ratio.
** Dry weight, without guard, cutting tool and shoulder harness
Note: The standard equipment for the tool shown above may vary by country.
Blade or Nylon head .......................................................1
Wrench 17-19 ..................................................................1
Hex wrench 4 ..................................................................1
Hex wrench 5 ..................................................................1
Double blade 305mm (12"), Triple blade 255mm (10"), Triple blade 305mm (12"), Star blade 230mm (9"),
Star blade 255mm (10"), 8-tooth blade 230mm (9"), 8-tooth blade 255mm (10"), Nylon cutting head (Bump & Feed Z5L),
Nylon cutting head (Ultra Auto 6L), Protector (for cutting blade only), Universal guard (=Protector),
Universal guard extension, Safety googles, Fuel mixture
650 (25-5/8)
Dimensions: mm (")
Width (W)
Height (H)
Length (L)
RBC413U
RBC414U,
RBC414UG
1,710 (67-3/8)
RBC413U RBC414U
435 (17-1/8)
630 (24-3/4)
515 (20-1/4)
M10x1.25, Left-handed
6,800
2.2 [at 5,000 min.
ˉ¹]
Max. spindle speed at no load: min.
ˉ¹ = rpm
Symmetric design
bike handle
Asymmetric design bike handle
7.1 (15.7) 7.2 (15.9)
Spindle thread size
W
L
Max. output: kW (PS) 1.4 (1.9) [at 7,000 min.ˉ¹]
T
ECHNICAL INFORMATION
Clutch Yes
Primer pump Yes
No
No
Easy start
(Spring-assisted recoil starter)
Decompression valve
Starting
system
W
L
RBC414UG is only available in Brazil for use of E25 gasoline (mixture of 25%
anhydrous ethanol and 75% gasoline.)
RBC414U is asymmetric design bike handle style. The handle can be removed
quickly from drive shaft without tool. The others are the same as RBC413U.
Box wrench 17 ................................................................1
Shoulder strap assembly ..................................................1
Accessory bag .................................................................1
Safety goggles (for Slovenia only) ..................................1
Fuel mixture (for Vietnam only) .....................................1
H
H
To Next Page
General
