Makita EA3201 SERIES - User Manual

EA3200S
EA3201S
EA3202S
EA3203S
Original Instruction Manual
Originalbruksanvisning
Original bruksanvisning
Alkuperäinen käyttöohje
Oriģinālā instrukciju rokasgrāmata
Originali naudojimo instrukcija
Algne kasutusjuhend
Оригинальное руководство по эксплуатации
Important: Read this instruction manual carefully before putting the petrol chain saw into operation and strictly observe the
safety regulations! Keep this instruction manual!
Viktigt: Läs denna Instruktionsbok noga innan den bensindrivna kedjesågen används och följ säkerhetsföreskriftena
noggrant! Förvara instruktionsboken omsorgsfullt. Förvara instruktionsboken omsorgsfullt.
Obs: Les denne bruksanvisningen nøye før du tar bensinmotorsagen i bruk. Følg sikkerhetsanvisningene nøye! Ta vare på
denne bruksanvisningen!
Tärkeää: Lue tämä käyttöohje huolellisesti ennen bensiinikäyttöisen moottorisahan ottamista käyttöön, ja noudata
turvamääräyksiä tarkasti. Säilytä tämä käyttöohje.
Uzmanību: Pirms benzīna ķēdes zāģa izmantošanas uzmanīgi izlasiet šo lietošanas pamācību un obligāti ievērojiet
norādītos drošības tehnikas noteikumus! Rūpīgi uzglabājiet lietošanas pamācību!
Dėmesio: Prieš pirmą kartą naudodami benzininį grandininį pjūklą, atidžiai perskaitykite šią vartojimo informaciją ir būtinai
laikykitės saugumo technikos taisyklių! Rūpestingai saugokite šią vartojimo informaciją!
Tähelepanu: Lugege enne bensiinimootoriga kettsae esmast kasutamist tähelepanelikult läbi käesolev kasutusjuhend ja
pidage rangelt kinni ohutusnõuetest! Hoidke kasutusjuhend korralikult alles!
Внимание: Перед первым запуском бензопилы основательно прочитайте настоящую инструкцию по эксплуатации и
строго соблюдайте правила техники безопасности!Тщательно сохраняйте настоящую инструкцию по эксплуатации!

Summary

3. SAFETY PRECAUTIONS

3-2. General Safety Precautions

General safety rules for operating the chain saw and user responsibilities.

3-3. Protective Equipment

Lists essential protective gear like helmet, eye/ear protection, gloves, and safety shoes.

3-4. Fuels and Refueling

Covers safe handling of gasoline, fuel mixture ratios, and refueling procedures.

3-5. Putting into Operation

Steps and precautions before starting the chain saw, including component checks.

3-6. Kickback Prevention

Explains kickback, its causes, and how to prevent it to avoid injuries.

3-7. Working Behavior and Methods

Guidelines for safe operation, footing, body positioning, and handling the saw during work.

3-9. Maintenance Overview

6. Putting into Operation

6 a. Models with Fastening Nuts

6 a-1. Mounting Guide Bar and Chain

Step-by-step guide for installing the guide bar and saw chain onto the saw.

6 a-2. Tightening the Saw Chain

Procedure for properly tensioning the saw chain and securing the guide bar.

6 a-3. Checking Chain Tension

How to verify the correct tension of the saw chain for safe operation.

6 a-4. Retightening the Saw Chain

Instructions on how to re-tension the saw chain after initial use or wear.

6 b. QuickSet Guide Bar

6 b-1. Mounting Guide Bar and Chain

6 b-2. Tensioning the Saw Chain

6 b-3. Checking Chain Tension

6 b-4. Retensioning the Saw Chain

6 c. Quick Tensioner (TLC)

6 c-1. Mounting Guide Bar and Chain

6 c-2. Tightening the Saw Chain

6 c-3. Checking Chain Tension

6 c-4. Retensioning the Saw Chain

6-5. Chain Brake Operation

Explains how the inertia chain brake engages and how to manually engage/release it.

6-6. Fueling the Saw

6-7. Chain Oil

6-8. Filling Fuel and Chain Oil

6-9. Checking Chain Lubrication

6-10. Adjusting Chain Lubrication

6-11. Starting the Engine

Detailed instructions for starting the engine, covering both cold and warm starts.

6-13. Checking the Chain Brake

Method for testing the chain brake's function before each use.

7. MAINTENANCE

7-1. Sharpening the Saw Chain

Comprehensive guide on how and when to sharpen the saw chain, including angles and file types.

7-14. Periodic Maintenance Instructions

9. Troubleshooting

Makita EA3201 SERIES Specifications