Makita UH422D User Manual

13 ENGLISH
Adjusttheholepositionsbyturningthegearas
illustrated.
1
►1. Grease
1
►1. Grease
Apply some grease provided with the new shear blades
as illustrated.
1
2
3
►1. Blade 2. Sponge 3. Sleeves
Put the removed sponge in the same position as the
old one. Make sure that the sleeves provided with the
new shear blades are put on the pins of the blade.
Place the new shear blades on the tool so that the pins
tintheholesofthegear.Ifthesleevesonthepins
comeo󰀨mistakenly,putthemintotheholesofthegear
beforehand.
1
1
2
►1. Screws 2. Washer
Install the blade and tighten the four screws and put the
removed washer in the same position as the old one.
1
►1. Screws
Install the under cover on the tool and tighten the four
screwsrmly.

Makita UH422D Specifications

General

Type	Hedge Trimmer
Blade Length	420 mm
Voltage	18 V
Power source	Battery
Battery type	Li-Ion
Cutting width	420 mm
Strokes per Minute (SPM)	1, 600 SPM
No-load speed	1, 600 SPM
Blade type	Double-sided