To Next PageTo Next PageWhy does my Makita UR3502 Trimmer motor not run?
If your Makita Trimmer's motor isn't running, first ensure that the power cord is properly plugged into the mains. If it is, the power cable might be broken, in which case you should ask your local authorized service center for repair. Also, the drive system may not be working correctly, so you should ask your local authorized service center for repair.
What to do if my Makita Trimmer motor stops after a little use?
If your Makita Trimmer motor stops running after a short period of use, it may be overheating. Stop using the tool and allow it to cool down before resuming operation.
What to do if the cutting tool of my Makita UR3502 Trimmer does not rotate?
If the cutting tool of your Makita Trimmer doesn't rotate, and you've stopped the machine, it could be due to a foreign object jammed between the guard and the cutting tool. Remove the object to resolve this. Alternatively, the cutter blade fastening nut might be loose, in which case you should properly tighten the nut. A bended cutter blade can also cause this issue, so replace the blade if necessary. If none of these solutions work, the drive system may not be working correctly and you must contact your local authorized service center for repair.
Why is my Makita UR3502 vibrating abnormally?
If you experience abnormal vibration with your Makita Trimmer (and have stopped the machine), it could be because one end of the nylon cord has broken. Try bumping the nylon cutting head against the ground while it's rotating to feed more cord. Another cause could be a bended, cracked, or worn cutter blade, which would require replacement. Also, check if the cutter blade fastening nut is loose and tighten it properly. If the problem persists, the drive system may not be functioning correctly, and you should seek assistance from your local authorized service center.
What to do if the cutting tool and motor cannot stop on my Makita UR3502 Trimmer?
If the cutting tool and motor of your Makita Trimmer cannot stop, disconnect the mains plug immediately and ask your local authorized service center for repair. This could be due to an electric or electronic malfunction.
General| Power source | AC |
|---|---|
| Type | String trimmer |
| Head type | Nylon line |
| Product color | Black, Blue |
| Uncertainty K | 1.5 m/s² |
| Blade material | Nylon |
| Plant protector | Yes |
| Rotational speed | 5700 RPM |
| Sound power level | 93.84 dB |
| Sound pressure level | 85.3 dB |
| Cutting diameter (max) | 350 mm |
| Sound power level uncertainty | 1.58 dB |
| Sound pressure level uncertainty | 2.5 dB |
Weight and Dimensions| Length | 1630 mm |
|---|---|
| Weight | 4900 g |
Technical specifications including length, input, speed, and weight.
Makita's declaration of compliance with European directives.
Explanation and avoidance of sudden tool reactions.
Steps and recommendations for tool upkeep.
