Fault Cause Remedy
> Filter element is clogged. • See section “Cleaning the filter
element” and “Replacing the
filter element”.
‡ No suction power during wet
cleaning
> Tank is full (floater closes the
suction opening).
• Switch off the cleaner. Empty
the tank.
‡ Voltage fluctuations > Impedance of power supply is
too high.
• Use a suitable extension cord
(see section “Technical data”).
• Connect the cleaner to another
socket closer to the fuse box.
Voltage fluctuations over 7
% should not occur if the
impedance at the transfer point
is ≤ 0.15 Ω.
For European countries only:
EC Declaration of Conformity
Makita declares that the following Machine(s):
Designation of the Machine: Wet and dry vacuum cleaner
Model No./Type: VC3012L
Conforms to the following European Directives:
2006/42/EC, 2014/30/EU, 2011/65/EU
They are manufactured in accordance with the following Standard or standardized documents:
EN 60335-1: 2012 + A11:2014, EN 60335-2-69:2012
The Technical file in accordance with 2006/42/EC is available from:
Makita Europe N.V., Jan-Baptist Vinkstraat 2, 3070 Kortenberg, Belgium
06.06.2016
Yasushi Fukaya
Director
Makita Europe N.V., Jan-Baptist Vinkstraat 2, 3070 Kortenberg, Belgium
To Next Page
Loading...
Need help?
General
