2
ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model: XCU08 XCU09
Overall length (without guide bar) 270 mm
(10-5/8″)
Rated voltage D.C. 36 V
Net weight
4.8 - 5.0 kg (10.5 - 11.0 lbs) 4.8 - 5.1 kg (10.6 - 11.1 lbs)
Standard guide bar length 350 mm
(14″)
400 mm
(16″)
Recommended guide
bar length
with 90PX 250 - 400 mm
(10″ - 16")
with 91PX 250 - 400 mm
(10″ - 16")
Applicable saw chain type
(refer to the table below)
90PX
91PX
Standard sprocket Number of teeth 6
Pitch 3/8″
Chain speed 0 - 20 m/s
(0 - 1,200 m/min)
(0 - 3,940 ft/min)
Chain oil tank volume 200 cm
3
(6.8 oz)
• Due to our continuing program of research and development, the specications herein are sub-
ject to change without notice.
• Specications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The light-
est and heaviest combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge
BL1830 / BL1830B / BL1840B / BL1850B / BL1860B
• Some of the battery cartridges listed above may not be available depending on your region of
residence.
WARNING: Only use the battery cartridges listed above. Use of any other battery cartridges
may cause injury and/or re.
To Next Page
Loading...
Need help?
General
