3
ENGLISH
Saw chain, guide bar, and sprocket combination
Saw chain type 90PX
Number of drive links 40 46 52 56
Guide bar Guide bar length 250 mm
(10″)
300 mm
(12″)
350 mm
(14″)
400 mm
(16″)
Cutting length 238 mm
(9-3/8″)
294 mm
(11-5/8″)
350 mm
(13-3/4″)
387 mm
(5-1/4″)
Part No. 161846-0 165245-8 165246-6 165247-4
Pitch 3/8″
Gauge 1.1 mm
(0.043″)
Type Sprocket nose bar
Sprocket Number of teeth 6
Pitch 3/8″
Saw chain type 91PX
Number of drive links 40 46 52 56
Guide bar Guide bar length 250 mm
(10″)
300 mm
(12″)
350 mm
(14″)
400 mm
(16″)
Cutting length 238 mm
(9-3/8″)
294 mm
(11-5/8″)
350 mm
(13-3/4″)
387 mm
(5-1/4″)
Part No. 168408-5 165200-0 165201-8 165202-6
Pitch 3/8″
Gauge 1.3 mm
(0.050″)
Type Sprocket nose bar
Sprocket Number of teeth 6
Pitch 3/8″
WARNING: Use appropriate combination of the guide bar and saw chain. Otherwise personal
injury may result.
SAFETY WARNINGS
General power tool safety warnings
WARNING: Read all safety warnings,
instructions, illustrations and specica-
tions provided with this power tool. Failure
to follow all instructions listed below may result
in electric shock, re and/or serious injury.
Save all warnings and instruc-
tions for future reference.
The term "power tool" in the warnings refers
to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
Work area safety
1. Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
2. Do not operate power tools in explosive
atmospheres, such as in the presence of
ammable liquids, gases or dust. Power
tools create sparks which may ignite the
dust or fumes.
3. Keep children and bystanders away
while operating a power tool. Distractions
can cause you to lose control.
Electrical Safety
1. Power tool plugs must match the outlet.
Never modify the plug in any way. Do
not use any adapter plugs with earthed
(grounded) power tools. Unmodied plugs
and matching outlets will reduce risk of elec-
tric shock.
To Next Page
Loading...
Need help?
General
