Need help?Do you have a question about the Makita XCV08 and is the answer not in the manual?
General| Model | XCV08 |
|---|---|
| Category | Vacuum Cleaner |
| Power Source | Cordless |
| Voltage | 18V |
| Battery Voltage | 18V |
| Battery Type | Lithium-Ion |
| Airflow | 57 CFM |
| Type | Wet/Dry |
| Container Capacity | 8.5 liters |
| Dust Capacity | 8.5 liters |
| Water Lift | 40 inches |
| Weight | 10.4 lbs |
| Noise Level | 70 dB |
Details model, dimensions, voltage, weight, and performance metrics.
Covers Bluetooth version, frequency band, and transmission range.
Outlines FCC/IC compliance for US and Canada.
Provides essential safety precautions for appliance operation.
Covers 18 critical warnings for safe use, handling, and environment.
Provides 4 important instructions for battery tool usage and care.
Continues warnings for appliance, battery pack, fire, temperature, and charging.
Important safety instructions for handling and storing battery cartridges.
Provides 4 tips for maintaining maximum battery life.
Lists 5 safety instructions for the wireless unit.
Explains battery indicator lamps and their meaning for remaining capacity.
Details battery status (On, Off, Blinking) and corresponding remaining capacity.
Explains the tool/battery protection system for power cut-off.
Describes switches, caster control, and carriage handle.
Explains clean operation by linking a supported tool.
Guides on how to register a Makita tool with the cleaner.
Details the procedures for tool registration and cleaner setup.
Explains how to initiate the wireless activation after registration.
Describes starting wireless operation and stopping it.
Provides steps to cancel a specific tool's registration.
Outlines the procedure to erase all registered tools.
Details steps 1-5 for erasing all tool registrations.
Explains meanings of wireless activation lamp colors, blinking, and duration.
Addresses lamp problems and failures in registration/cancellation.
Solves problems like no power, incorrect operation, or distance issues.
Fixes issues with cleaner not running with tool or running unexpectedly.
Addresses issues when unable to erase all tool registrations.
Lists and illustrates all parts of the cleaner.
Details installing the powder filter (HEPA) and prefilter for dry dust.
Guides on installing the optional paper pack accessory.
Instructions for installing paper pack and polyethylene bag.
Provides safety warnings and steps for emptying the polyethylene bag.
Instructions for installing tool box and storing accessories.
Details connecting the hose and general maintenance notices.
Explains how to clean the powder filter (HEPA) and prefilter.
Lists optional accessories recommended for the tool.
Outlines the terms of the limited one-year warranty.
Lists conditions under which the warranty does not apply.
Disclaims liability for indirect, incidental, or consequential damages.
Disclaims implied warranties of merchantability and fitness after one year.
Warns about chemicals in construction dust causing cancer or reproductive harm.
Advises on reducing exposure through ventilation and safety equipment.
To Next Page
